About the indicators
(on/standby) indicator
- Turns off
- The speaker is in the standby mode.
- Lights up (green)
- The speaker is turned on.
- Lights up (orange)
- The speaker is in the BLUETOOTH/Network standby mode.
The BLUETOOTH/Network standby function can be set only when the speaker is connected to an AC outlet via the AC adaptor. When the speaker is being powered by the built-in battery only, the BLUETOOTH/Network standby function is not available.
- Flashes (green)
-
- If you press the (on/standby) button to turn off the speaker, the indicator flashes slowly, then turns off. While the indicator is flashing, the speaker is not operational.
- When you tap the VOL (volume) -/+ button, the indicator flashes once or three times according to the volume adjustment.
- If you press the
- Flashes (red)
- The speaker is in the protect mode. Push the RESET button on the rear of the speaker with a pointed object, such as a pin.
CHARGE indicator
- Turns off
- Charging of the speaker is completed.
- Lights up
- The speaker is charging.
- Flashes slowly
- The built-in battery is running low and needs to be charged. In this state, the speaker cannot supply power to other devices.
- Flashes three times and turns off
- If the CHARGE indicator flashes three times and goes off when you turn on the speaker, the battery is empty and needs to be charged.
LINK indicator
- Turns off
- The speaker is not connected to a network.
- Lights up (green)
- The speaker is connected to a Wi-Fi network.
- Lights up (orange)
- The speaker is connected to a wired network.
- Flashes (green)
- The speaker is in the process of connecting to a Wi-Fi network.
- Flashes (orange)
- The speaker is in the process of connecting to a wired network.
- Flashes (red)
- The network connection failed.
- Lights up (red)
- The network connection failed, or connection failed even though the network setting is complete.
AUDIO IN indicator*1*2
- Lights up (white)
- The speaker is in the AUDIO IN mode.
(BLUETOOTH) 
PAIRING indicator*1*2*3*4
- Lights up (white)
- The speaker is connected to a BLUETOOTH device.
- Flashes quickly (white)
- The speaker is pairing with a BLUETOOTH device.
- Flashes (white)
- The speaker is searching for a BLUETOOTH device to connect.
NETWORK indicator*1*2*3
- Lights up (white)
- The speaker is in the NETWORK mode.
- Flashes (white)
- The speaker is receiving an audio file via the network.
UPDATE indicator
- Lights up (orange)
- The indicator lights up when software update is available. (Normally off.)
*1 If software update fails, the indicator also lights up.
*2 When checking Wi-Fi signal strength, the indicator also flashes.
*3 When switching the wireless function to on or off, the indicator also flashes.
*4 When switching the BLUETOOTH audio streaming, the indicator also flashes.