Switching between monaural audio playback and stereo audio playback

Switching the audio output

At the time of purchase, the audio output of the speaker is set for monaural audio playback.

You can change the audio output setting of the speaker with “Sony | Music Center.”

  1. Tap [Music Center] on your smartphone, etc. to start up the application.

    Music Center

  2. Tap [SRS-XE200].
  3. Tap [Settings] - [Sound] - [Mono/Stereo] and select the audio output setting.

Hint

  • To use an LDAC compatible BLUETOOTH device, change the audio output setting of the speaker to enable stereo audio playback.

Placing the speaker vertically/horizontally

The speaker can be placed either vertically or horizontally (multi-placement).

While the audio output of the speaker is set for stereo audio playback, the audio in the right channel (right side) is output from the speaker component closer to the Sony logo inscription.


Vertical placement

Illustration of the vertically placed speaker for locating the left channel (top) and the right channel (middle), and the SONY logo inscription (bottom)

Horizontal placement

Illustration of the horizontally placed speaker for locating the left channel (left), the right channel (middle), and the SONY logo inscription (right)

: Sony logo

: left channel (left side)

: right channel (right side)


Place the speaker with the Sony logo inscription located on your right-hand side.

This placement is recommended when the audio output of the speaker is changed to enable stereo audio playback.

Note

  • Place the speaker on a flat, level surface. If you place the speaker on a sloped surface, the speaker may fall over or fall off the surface due to its own vibration, resulting in injuries, malfunctions, or performance degradation.

Go to Page Top