[Input]
You can select the input and make settings related to the input.
- Press the joystick on the rear of the monitor and move it up, down, to the left, or to the right to display the setting screen.
- Select the desired setting and press the joystick.
Details of the menu items
[HDMI 1]
Selects the HDMI 1 input.
[HDMI 2]
Selects the HDMI 2 input.
[DP]
Selects the DisplayPort input.
[Auto input switch]
Select the input with the input signal automatically.
If there are multiple input signals, the inputs are selected in the following order of priority.
HDMI 1→HDMI 2→DisplayPort
[Off]: Turns off this function.
[On]: Turns on the auto input select function.
[Control for HDMI]
In conjunction with the monitor, you can perform operations, such as turning on/off or selecting the input, of the device connected with an HDMI cable.
[Off]: Turns off this function.
[On]: Turns on the HDMI device control function.
[DP version number]
Set the DisplayPort version number.
Set to the same version as the DisplayPort of the connected device.
[1.2]/[1.4]/[2.1]
Note
- To display DisplayPort version 2.1 compliant images, DisplayPort version 2.1 compliant cables and connected devices are required.
- The supplied DisplayPort cable supports the version indicated below.
SDM-27Q10S: 2.1
SDM-27Q10L: 1.4
Hint
- If the connected device does not support the DisplayPort version, the screen may be displayed improperly.
In this case, the screen will be displayed properly by changing the DisplayPort version from high to low ([2.1] → [1.4] → [1.2]).
