Updating the software

You can update the software of the monitor.

  1. Download the update file.

    Download the update file to your computer from the support sites.

  2. Expand the update file.

    1: Expanding the update file

    Since the downloaded update file is compressed, right click on the file, and select the item for expanding the file. Then, the file will be expanded.

    You may not be able to expand the file with the above procedure depending on your OS environment.

    2: Confirming the expanded file

    Confirm that the name of the expanded file is as indicated below.
    SDM-27Q10S: SDM-27Q10S.bin
    SDM-27Q10L: SDM-27Q10L.bin

    Do not change the file name.

  3. Copy the file to a USB memory.

    1: Preparing a USB memory

    Prepare the USB memory with a FAT32 or NTFS file system.

    2: Copying the file to your USB memory

    Copy the expanded file to the root directory (top layer) of the USB memory.

  4. Insert the USB memory into the monitor.

    1: Pulling the USB memory out of your computer

    Follow the procedure of your OS to pull the USB memory out of your computer.

    2: Inserting the USB memory into the monitor

    Insert the USB memory into the UPDATE port of the monitor.

  5. Update the monitor.

    Select [Others] and then [USB software update] in the menu.

    The progress is displayed on the screen during the update. Then, the monitor restarts automatically after the update is finished. The update requires about 1 minute.

Note

  • When you put the update file on a layer other than the root directory of the USB memory or change the name of the update file, you cannot update the monitor.
  • You can update the monitor via the UPDATE port only.
  • Do not pull out the power cable, USB memory and connection cable during the update.
  • Some USB memories are not supported.
Go to Page Top