RS-232C
You can control the LCD Monitor/LCD Display from an external service via RS-232C. The RS-232C connection is briefly explained in this page.
Settings
To establish the connection, please set [RS232C control] to On.
Go to [Home] → [Settings] → [Remotes & accessories] → [RS232C control].
Interface
Establish the RS-232C connection to the LCD Monitor/LCD Display by using a 3.5 mm stereo mini plug (supplied).
3.5 mm Stereo mini plug
(A) TIP: LCD Monitor/LCD Display → Controller
(B) RING: Controller → LCD Monitor/LCD Display
(C) SLEEVE: GND
Connection settings
When establishing the RS-232C connection, make connection settings as below.
| Baud rate | 9600 bps |
| Data | 8 bit |
| Parity | None |
| Start bit | 1 bit |
| Stop bit | 1 bit |
| Flow control | None |
Data format
For information on specifications and basic structure, refer to the BRAVIA Knowledge Center.
https://pro-BRAVIA.sony.net/