Using the supplied dedicated headphone cable
You can use the headset as noise canceling headphones by connecting a device via the supplied dedicated headphone cable and turn the headset on. The headset supports high resolution audio playback when connecting via the supplied dedicated headphone cable and turned on.
When turning on the headset, the indicator (green) next to the NC/AMBIENT button lights up or flashes.
-
Connect a playback device to the micro-USB port with the supplied dedicated headphone cable.
Hint
- You can enjoy music by connecting the supplied dedicated headphone cable to the headset even when the headset is turned off. In this case the noise canceling function is not available.
- To enjoy high resolution audio music or use the noise canceling function/Ambient Sound Mode, turn the headset on.
- Use the supplied plug adaptor for in-flight use when you enjoy the in-flight entertainment.
- When the noise canceling function is turned on, the headset turns off automatically if you disconnect the dedicated headphone cable.
- When an incoming call arrives, a ring tone will be heard via the headphones. Answer the call using your smartphone or mobile phone, and talk using the microphone of the phone. You can hear the voice of the caller from the headphones.
- If you disconnect the dedicated headphone cable from the smartphone or mobile phone, you can talk using the microphone and speaker of the phone.
Note
- Use the supplied dedicated headphone cable only.
- Make sure you insert the plug firmly.
- Close the cover of the micro-USB port to prevent water or dusts being mixed into the headset, when you are not using the supplied dedicated headphone cable.
- The BLUETOOTH function cannot be used.
-
The
button, +/- buttons and 
button cannot be used. For volume, playback, pausing, etc., control with the connected device.
- The NC/AMBIENT button cannot be used when the headset is powered off.
- Depending on the in-flight entertainment, the plug adaptor for in-flight use may not be used.
