Performing Initial Settings

You need to perform initial settings before operating the unit for the first time, after replacing the car battery, or changing connections.

If the initial settings screen does not appear when you turn on the unit, perform the factory reset to initialize the unit.

  1. Touch [Language], then set the display language.
  2. Touch [Demo] repeatedly to select [OFF] to disable the demonstration mode.
  3. Touch [Set Date/Time], then set the date and time.
    XAV-AX3250(EUR): skip to step 5.
  4. After setting the date and time, touch [OK].
    XAV-AX3200(E)/XAV-AX3200(E17)/XAV-AX3200(IN): proceed to step 5.
    XAV-AX3200(UC)/XAV-AX3250(UC): skip to step 6.
  5. Touch [Tuning Steps], then set the FM/AM tuning step. (XAV-AX3200(E)/XAV-AX3200(E17)/XAV-AX3200(IN)/XAV-AX3250(EUR))
  6. To return to the previous display, touch (back), then touch [OK].
    The startup caution appears.
  7. Read through the startup caution, then if you accept all conditions, touch [Close].
    The setting is complete.

This setting can be further configured in the setting menu.

Go to Page Top