Connecting another amplifier in zone 2/3
You can enjoy image (*) and sound from a device connected to the receiver in a zone other than the main zone. For example, you can watch a DVD in the main zone and listen to a CD in zone 2.
* For a connection using the HDMI OUT B jack only
Connecting another amplifier using the ZONE 2 VIDEO/AUDIO OUT jack
TV monitor
Speakers
Other amplifier/receiver
Video cable (not supplied)
Audio cable (not supplied)
Note
- Stream input signals cannot be output even when outputting optical/coaxial audio signals.
- When outputting optical/coaxial audio signals, set the audio output to PCM on the connected device. For details, refer to the operating instructions of the connected device.
Connecting another amplifier using the HDMI OUT B jack
HDMI video/audio input signals, optical/coaxial audio input signals are output to zone 2 using HDMI OUT B jack on the receiver.
Speakers
TV
Other amplifier/receiver
HDMI cable (not supplied)
Note
- The following settings are required for this connection.
- Set [HDMI Out B Mode] in the HDMI Setup menu to [Zone2]
- Set [Zone2 Audio Out] in the HDMI Setup menu to [Zone2 AMP]
- When outputting optical/coaxial audio signals, set the audio output to PCM on the connected device. For details, refer to the operating instructions of the connected device.
Connecting another amplifier using the ZONE 3 AUDIO OUT jack
Speakers
Other amplifier/receiver
Audio cable (not supplied)
Note
- Only devices connected to the analog audio input jacks and the built-in tuner (FM/AM) can output signals to Zone 3. No signals are output from devices connected to only the digital input jacks.