Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION (for USA and Canadian models only):
- STR-ZA3000ES
- With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.
- STR-ZA2000ES
- With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 95 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.
- STR-ZA1000ES
- With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 90 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
STR-ZA3000ES
- POWER OUTPUT (*1) (*2)
Rated Power Output at Stereo Mode - (6 ohms 20 Hz – 20 kHz, THD 0.09%): 100 W + 100 W
- Reference Power Output at Stereo Mode
- (8 ohms 20 Hz – 20 kHz, THD 0.09%): 80 W + 80 W
- Reference Power Output
- (6 ohms 1 kHz, THD 0.9%)
- FRONT: 120 W + 120 W
- CENTER: 120 W
- SURROUND: 120 W + 120 W
- SURROUND BACK: 120 W + 120 W
- Reference Power Output
- (8 ohms 1 kHz, THD 0.9%)
- FRONT: 110 W + 110 W
- CENTER: 110 W
- SURROUND: 110 W + 110 W
- SURROUND BACK: 110 W + 110 W
- Reference Power Output at Surround Mode (*3)
- (6 ohms, 1 kHz, THD 0.9%)
- 150 W per channel
STR-ZA2000ES
- POWER OUTPUT (*1) (*2)
Rated Power Output at Stereo Mode - (6 ohms 20 Hz – 20 kHz, THD 0.09%): 95 W + 95 W
- Reference Power Output at Stereo Mode
- (8 ohms 20 Hz – 20 kHz, THD 0.09%): 75 W + 75 W
- Reference Power Output
- (6 ohms 1 kHz, THD 0.9%)
- FRONT: 120 W + 120 W
- CENTER: 120 W
- SURROUND: 120 W + 120 W
- SURROUND BACK: 120 W + 120 W
- Reference Power Output
- (8 ohms 1 kHz, THD 0.9%)
- FRONT: 100 W + 100 W
- CENTER: 100 W
- SURROUND: 100 W + 100 W
- SURROUND BACK: 100 W + 100 W
- Reference Power Output at Surround Mode (*3)
- (6 ohms, 1 kHz, THD 0.9%)
- 150 W per channel
STR-ZA1000ES
- POWER OUTPUT (*1) (*2)
Rated Power Output at Stereo Mode - (6 ohms 20 Hz – 20 kHz, THD 0.09%): 90 W + 90 W
- Reference Power Output at Stereo Mode
- (8 ohms 20 Hz – 20 kHz, THD 0.09%): 70 W + 70 W
- Reference Power Output
- (6 ohms 1 kHz, THD 0.9%)
- FRONT: 120 W + 120 W
- CENTER: 120 W
- SURROUND: 120 W + 120 W
- SURROUND BACK: 120 W + 120 W
- Reference Power Output
- (8 ohms 1 kHz, THD 0.9%)
- FRONT: 90 W + 90 W
- CENTER: 90 W
- SURROUND: 90 W + 90 W
- SURROUND BACK: 90 W + 90 W
- Reference Power Output at Surround Mode (*3)
- (6 ohms, 1 kHz, THD 0.9%)
- 150 W per channel
*1 Measured under the following conditions (Area: Power requirements):
USA and Canadian models: 120 V AC, 60 Hz
Other models: 230 V AC, 50 Hz
*2 Depending on the sound field settings and the source, there may be no sound output.
*3 Reference power output for front, center, surround, surround back speakers.
Frequency response (*4)
- SA-CD/CD, TV, AUX, VIDEO:
- 10 Hz – 100 kHz/± 3 dB
Inputs (Analog)
- SA-CD/CD, TV, AUX, VIDEO:
- Sensitivity: 150 mV
- Impedance: 50 kohms
- S/N (*4): 105 dB (A, 20 kHz LPF. 500 mV)
*4 When [2ch Analog Direct] is being used.
Inputs (Digital)
- IN (BD/DVD) (Coaxial):
- Impedance: 75 ohms
- S/N: 96 dB (A, 20 kHz LPF)
- IN 1 (AUX), IN 2 (TV) (Optical):
- S/N: 96 dB (A, 20 kHz LPF)
Outputs
- ZONE 2 , ZONE 3 (AUDIO OUT):
- Voltage: 2 V
- Impedance: 1 kohm
- FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER (for STR-ZA3000ES):
- Voltage: 2 V
- Impedance: 1 kohm
- SUBWOOFER (for STR-ZA2000ES/STR-ZA1000ES)
- Voltage: 2 V
- Impedance: 1 kohm
FM tuner section
Tuning range: 87.5 MHz – 108.0 MHz
Antenna (aerial): FM wire antenna (aerial)
Antenna (aerial) terminals: 75 ohms, unbalanced
AM tuner section
- Tuning range (USA and Canada):
- 530 kHz – 1,710 kHz (Tuning scale: 10 kHz step)
- 531 kHz – 1,710 kHz (Tuning scale: 9 kHz step)
- Tuning range (other area):
- 531 kHz – 1,602 kHz (Tuning scale: 9 kHz step)
Antenna (aerial): Loop antenna (aerial)
Video section
Inputs/outputs
- Video:
- 1 Vp-p, 75 ohms
- COMPONENT VIDEO:
- Y: 1 Vp-p, 75 ohms
- PB: 0.7 Vp-p, 75 ohms
- PR: 0.7 Vp-p, 75 ohms
- 80 MHz HD Pass Through
HDMI Video
Input/Output (HDMI Repeater block)
All HDMI IN/OUT jacks support 4K resolution.
The following HDMI jacks support High-bandwidth Digital Content Protection System Revision 2.2 (HDCP 2.2).
HDMI IN 2/IN 3, HDMI OUT A/OUT B (for STR-ZA3000ES)
HDMI IN 2, HDMI OUT A (for STR-ZA2000ES/STR-ZA1000ES)
- 4096 × 2160p @ 59.94/60 Hz:
- 2D (*1)
- 4096 × 2160p @ 50 Hz:
- 2D (*1)
- 4096 × 2160p @ 23.98/24 Hz:
- 2D (*2)
- 3840 × 2160p @ 59.94/60 Hz:
- 2D (*1)
- 3840 × 2160p @ 50 Hz:
- 2D (*1)
- 3840 × 2160p @ 29.97/30 Hz:
- 2D (*2)
- 3840 × 2160p @ 25 Hz:
- 2D (*2)
- 3840 × 2160p @ 23.98/24 Hz:
- 2D (*2)
- 1920 × 1080p @ 59.94/60 Hz:
- 2D
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 1920 × 1080p @ 50 Hz:
- 2D
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 1920 × 1080p @ 29.97/30 Hz:
- 2D
- 3D: Frame packing
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 1920 × 1080p @ 25 Hz:
- 2D
- 3D: Frame packing
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 1920 × 1080p @ 23.98/24 Hz:
- 2D
- 3D: Frame packing
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 1920 × 1080i @ 59.94/60 Hz:
- 2D
- 3D: Frame packing
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 1920 × 1080i @ 50 Hz:
- 2D
- 3D: Frame packing
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 1280 × 720p @ 59.94/60 Hz:
- 2D
- 3D: Frame packing
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 1280 × 720p @ 50 Hz:
- 2D
- 3D: Frame packing
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 1280 × 720p @ 29.97/30 Hz:
- 2D
- 3D: Frame packing
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 1280 × 720p @ 23.98/24 Hz:
- 2D
- 3D: Frame packing
- 3D: Side-by-Side (Half)
- 3D: Over-Under (Top-and-Bottom)
- 720 × 480p @ 59.94/60 Hz:
- 2D
- 720 × 576p @ 50 Hz:
- 2D
- 640 × 480p @ 59.94/60 Hz:
- 2D
*1 YCbCr 4:2:0/Supported 8-bit only
*2 Supported 8-bit only
General section
Power requirements
USA and Canadian models: 120 V AC, 60 Hz
Other models: 230 V AC, 50 Hz
Power consumption
290 W
Power consumption (during standby mode)
0.3 W (When [Control for HDMI], [Pass Through], [Network Standby] and [External Control] are set to [Off], and the power for zone 2/zone 3 is turned off.)
Dimensions (width/height/depth) (Approx.)
430 mm × 174 mm × 410 mm (17 in × 6 7/8 in × 16 1/4 in)
including projecting parts and controls
Mass (including the front cover) (Approx.)
STR-ZA3000ES: 13.4 kg (29 lb 9 oz)
STR-ZA2000ES: 13.0 kg (28 lb 11 oz)
STR-ZA1000ES: 12.3 kg (27 lb 2 oz)
Design and specifications are subject to change without notice.