MULTI CHANNEL AV RECEIVERSTR-ZA3000ES/STR-ZA2000ES/STR-ZA1000ES

No image appears on the TV.

  • Select the appropriate input using the input buttons.
  • Set your TV to the appropriate input mode.
  • Move your audio device away from the TV.
  • Assign the video input (HDMI, COMPONENT or VIDEO IN) correctly.
  • When you are upconverting input signals using the receiver, use the same type of output signals as input signals.
  • Make sure that cables are correctly and securely connected to devices.
  • Some playback devices need to be set up. Refer to the operating instructions supplied with each device.
  • Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for 1080p, Deep Color, 4K or 3D transmission.
  • The output of the HDMI video signals of the receiver may be set to [HDMI OFF]. In this case, set to [HDMI A], [HDMI B], or [HDMI A + B]. You can only select [HDMI B] or [HDMI A+B] when [HDMI Out B Mode] is set to [Main].
  • If you want to playback HDCP 2.2 content, be sure to connect the playback device and TV to the HDCP 2.2 capable HDMI input and output of the receiver. Also check that the TV is compatible with HDCP 2.2.
Go to Page Top