Connecting to a paired Bluetooth device

  1. Turn on the headset.

    Press and hold the button for about 2 seconds.

    Check that the indicator (blue) continues to flash after you release your finger from the button. You will hear the voice guidance “Power on”.

    After the headset turns on, if it has automatically connected to the last connected device, you will hear a voice guidance “Bluetooth connected”.

    Check the connection status on the Bluetooth device. If it is not connected, proceed to step 2.

  2. Make the Bluetooth connection from the Bluetooth device.

    Refer to the operations in the operating instructions supplied with Bluetooth device. When connected, you will hear a voice guidance “Bluetooth connected”.

Hint

  • The above procedure is an example. For more details, refer to the operating instructions supplied with the Bluetooth device.

Note

  • When connecting, [WH-XB900N], [LE_WH-XB900N], or both may be displayed on the connecting device. When both or [WH-XB900N] is displayed, select [WH-XB900N]; when [LE_WH-XB900N] is displayed, select [LE_WH-XB900N].
  • If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply turning on the headset. In that case, deactivate the Bluetooth function on the device or turn off the power.
  • If you cannot connect your Bluetooth device to the headset, delete the headset pairing information on your Bluetooth device and perform the pairing again. As for the operations on your Bluetooth device, refer to the operating instructions supplied with the device.
Go to Page Top