[Monitor] Tab
-
[Name]
Displays the status lamp, name, and IP address of each MAS-A100.
The color of the status lamp indicates the status of the MAS-A100.
Information is not displayed when the MAS-A100 is offline (status lamp is gray).
-
[Description]
Displays the description of each MAS-A100.
-
[Flash]
Press the icon to start the LED of the MAS-A100 flashing.
-
[Output level]
Displays the output level using a green audio level bar. This cannot be changed.
-
[Gain limit]
Displays the gain limit status.
When one lamp is displayed, the microphone gain has reached the limit for suppressing feedback and maintaining audio quality.
When two lamps are displayed, the microphone gain has exceeded the limit and that audio quality has deteriorated.
To avoid deterioration in audio quality, set the microphone gain in the range so that the gain limit lamps are not lit or only one lamp is lit.
-
[Mic gain]
Displays the default value of the microphone gain.
Press the +/– buttons, or press the value and enter a new value directly, to temporarily change the microphone gain setting.
The changed setting reverts back to the default setting when the MAS-A100 switches from Active state to Standby state.
To change the setting permanently, use the [Settings] tab.
-
[Mute]
Turns audio muting of the MAS-A100 on/off.
-
[LED]
Turns the LED of the MAS-A100 on/off.
-
[Power]
Switches the state of the MAS-A100. Press the icon to toggle between Active state and Standby state.
