Application

Camera Display

Selects a camera view mode: [Normal], [Flipped].
[Rear Camera Guideline Adjust] displays the rear camera guidelines.
[Rear Camera Interruption] displays the video of the rear view camera connected to the REAR CAMERA IN cable when you put the gear shift in R (reverse).
[Camera 1 Interruption] automatically displays the video of the camera connected to the CAMERA IN 1 cable when the interruption signal is detected from the EXT IN 1 lead.
[Camera 2 Interruption] automatically displays the video of the camera connected to the CAMERA IN 2 cable when the interruption signal is detected from the EXT IN 2 lead.

Notes on connecting the iDataLink Maestro module (not supplied) (XAV-AX8500(UC))

  • When connecting the iDataLink Maestro module (not supplied) and you are using the interruption function from the module, [Rear Camera Interruption] is available. The Camera 1/Camera 2 interruption functions are set on [Maestro Settings] of [Application] in [Settings].
  • When connecting the iDataLink Maestro module (not supplied) and you are using the Backup Camera Dynamic Guidelines function, adjust the guideline.

    Illustration of the guideline

    A. 2.0 m (6 1/2 feet) behind the car
    B. 0.5 m (1 3/4 feet) behind the car


SXM Reset (XAV-AX8500(UC))

Initializes the SiriusXM Connect Vehicle Tuner settings: [Reset], [Cancel].


Maestro Input Level (XAV-AX8500(UC))

Adjusts the relative volume level to the signal input from the iDataLink Maestro module: –8 to +8.
(Available only when the connection with iDataLink Maestro is established.)


Maestro Settings (XAV-AX8500(UC))

Displays the menus for your original car settings and setting for the iDataLink Maestro module. Your display will vary based on the firmware in the iDataLink Maestro module.
(Available only when the connection with iDataLink Maestro is established.)


Radio Tuning Steps (XAV-AX8500(E)/XAV-AX8500(E17)/XAV-AX8500(IN))

Sets the FM/AM tuning step of your country or region.