Listening to music of a device via BLUETOOTH connection

You can enjoy listening to music of a BLUETOOTH device and operate it by the system via BLUETOOTH connection if it supports the following BLUETOOTH profiles.

A2DP (Advanced Audio Distribution Profile)

Enables you to enjoy high-quality audio contents wirelessly.

AVRCP (Audio Video Remote Control Profile)

Enables you to adjust the volume and operate to play, pause or skip to the beginning of the next/current track.


Operations may vary depending on the BLUETOOTH device. Refer also to the operating instructions supplied with the BLUETOOTH device.

Note

  • Make sure beforehand that the volume on the BLUETOOTH device and system are set to a moderate level to avoid sudden loud sound output from the system.

    Depending on the BLUETOOTH device, adjusting the volume of the system may not be possible on the BLUETOOTH device while playback on the device is stopped/paused.

  1. Connect the system with the BLUETOOTH device.

    The BLUETOOTH device name appears on the display when the BLUETOOTH connection is established.

    Once the system and the BLUETOOTH device are connected, you can control playback by pressing (play), (pause), (stop), (fast reverse), (fast forward), (previous), and(next).

  2. Start playback on the BLUETOOTH device.
  3. Adjust the volume by touching VOLUME -/+ on the system or operating the BLUETOOTH device.

Note

  • If the communication condition is poor, the BLUETOOTH device may react incorrectly to the operations on the system.

  • Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on the connected device.

  • Noise or sound interruption may occur depending on the BLUETOOTH device connected with the system, the communication environment or the usage environment.