BRAVIA Theatre Rear 8 (Rear Speaker)

Front, Bottom

The rear speaker is covered by fabric except for the top and bottom surfaces. There is a square indented area on the bottom of the rear speaker. There is the AC inlet on the side wall of the indented area and the LINK button on the top surface of the indented area. The left rear speaker has two tactile dots near the LINK button. Use them as a guide to distinguish the left and right rear speaker.

  1. Power indicator

    Indicates the rear speaker status by lighting or flashing in 3 colors (white/blue/red).

  2. AC inlet

  3. LINK

    • Press: Press to connect the rear speaker. Follow the connection procedure to operate.
    • Press and hold for 2 seconds until the notification sound plays: Turns off the rear speaker.
    • Press and hold for 10 seconds until the second notification sound plays: Resets the rear speaker.

Hint

  • In the hollow area on the bottom of the left rear speaker (REAR L), you will find two tactile dots side by side that are about 1 mm (1/16 in) in size. Use them as a guide to distinguish the left rear speaker from the right rear speaker.

Rear

The illustration below shows the rear speaker with the cover on the rear removed.

There is an oval cover slightly above the center of the rear on the rear speaker. When the cover is removed, there are holes for wall mounting and for attaching a speaker stand.

  1. Wall mounting hole

  2. Mounting hole for the general speaker stand

    This is compatible with the M5 size screw.

Note

  • When using the wall mounting hole or mounting hole for the general speaker stand, remove the cover by inserting a flathead screwdriver, etc.

TP1001847590