Mounting the Speakers and Wireless Amplifier on a Wall

The bar speaker, rear speakers, and wireless amplifier can be mounted on a wall.

Illustration of an example installation when the speaker system is wall-mounted. Attach the bar speaker to the wall below the wall-mounted TV. The rear speakers and wireless amplifier should be mounted on the wall behind the viewing position. Install the subwoofer anywhere you like as the sound is not directional.

Bar speaker

Rear speaker

Wireless amplifier

Note

  • Hang the bar speaker, rear speakers, and wireless amplifier horizontally on the reinforced wall.
  • Ask a Sony dealer or licensed contractor to install the bar speaker, rear speakers, and wireless amplifier securely with full consideration of safety.
  • Sony shall not be held responsible for accidents or damage caused by improper installation, lack of installation strength, misuse, or natural disaster.
  • Two or more persons are required to hang the bar speaker for safety.

Mounting the bar speaker on a wall

  1. Prepare two screws (not supplied) that are suitable for the wall mount holes on the rear of the bar speaker.

    Illustration indicating the dimensions of a screw. (a) represents the diameter of the screw head. (b) represents the diameter of the screw. (c) represents the length of the screw excluding the head.

    (a) 6 mm to 9.5 mm (1/4 in to 3/8 in)

    (b) 4 mm (3/16 in)

    (c) 30 mm (1 3/16 in) or longer


    Reference: Hole on the rear of the bar speaker

    Illustration indicating the dimensions of the hole on the rear of the bar speaker. (d) represents the width of the upper part of the hole. (e) represents the width of the lower part of the hole.

    (d) 5.1 mm (7/32 in)

    (e) 10 mm (13/32 in)

    Note

    • Prepare screws (not supplied) that are suitable for the wall material and stability. The screw may damage the wall depending on the wall material.

  2. Align the vertical line above the “ TV CENTER LINE” printed on the WALL MOUNT TEMPLATE (paper) (supplied) with the center of the width of your TV.

    Center of the TV

    WALL MOUNT TEMPLATE

  3. Shift the WALL MOUNT TEMPLATE down so that the distance between the bottom of the TV and the “ BAR SPEAKER TOP LINE” printed on the WALL MOUNT TEMPLATE (f) is 60 ㎜ (2 3/8 in) or longer.

    Adhere the WALL MOUNT TEMPLATE on the wall with a commercially available adhesive tape, etc.

    WALL MOUNT TEMPLATE

    Adhesive tape, etc.

    (f) 60 mm (2 3/8 in) or longer

    Note

    • When adhering the WALL MOUNT TEMPLATE on the wall, smooth it out fully.

  4. Fasten the screws prepared in step 1 securely into the screw marks on the “ SCREW LINE” printed on the WALL MOUNT TEMPLATE.

    Illustration indicating screw fastening position and fastening method. (g) represents the width of the two screw mounting positions. (h) represents the distance from the center of the template to the screw attachment point. (i) represents the length from the bottom of the screw head to the wall.

    Screw

    Marks

    (g) 585 mm (23 1/8 in)

    (h) 292.5 mm (11 5/8 in)

    (i) 9.7 mm to 10.7 mm (approx. 13/32 in)

    Note

    • Fasten the screws securely in the wall beam.

  5. Remove the WALL MOUNT TEMPLATE.

  6. Connect the bar speaker cable and AC power cord (mains lead) (supplied) to the subwoofer.

    Connect the bar speaker cable attached to the rear of the bar speaker to the FRONT SPEAKER jack and AC power cord (mains lead) to the AC inlet on the subwoofer.

    Bar speaker cable

    AC power cord (mains lead)

  7. Hang the holes on the rear of the bar speaker on the screws.

    Align the holes on the rear of the bar speaker with the screws, then hang the bar speaker on the two screws.

  8. Connect the HDMI cable (supplied) connected to the subwoofer to the eARC/ARC HDMI input jack on the TV.
  9. Connect the AC power cord (mains lead) connected to the subwoofer to the AC outlet (mains).

Mounting the rear speaker on a wall

  1. Prepare a screw (not supplied) that is suitable for the hole on the rear of the rear speaker.

    Illustration indicating the dimensions of a screw. (j) represents the diameter of the screw head. (k) represents the diameter of the screw. (l) represents the length of the screw excluding the head.

    (j) 6 mm to 9.5 mm (1/4 in to 3/8 in)

    (k) 4 mm (3/16 in)

    (l) 30 mm (1 3/16 in) or longer


    Reference: Hole on the rear of the rear speaker

    Illustration indicating the dimensions of the hole on the rear of the bar speaker. (m) represents the width of the upper part of the hole. (n) represents the width of the lower part of the hole.

    (m) 4.6 mm (3/16 in)

    (n) 10 mm (13/32 in)

    Note

    • Prepare screws (not supplied) that are suitable for the wall material and stability. The screw may damage the wall depending on the wall material.

  2. Fasten the screw on a wall as in the illustration below.

    Illustration indicating the length from the bottom of the screw head to the wall (o).

    (o) 3.8 mm to 4.8 mm (approx. 5/32 in)

    Note

    • Fasten the screws securely in the wall beam.

  3. Hang the hole on the rear of the rear speaker on the screw.

Mounting the wireless amplifier on a Wall

  1. Prepare two screws (not supplied) that are suitable for the wall mount holes on the bottom of the wireless amplifier.

    Illustration indicating the dimensions of a screw. (p) represents the diameter of the screw head. (q) represents the diameter of the screw. (r) represents the length of the screw excluding the head.

    (p) 6 mm to 9.5 mm (1/4 in to 3/8 in)

    (q) 4 mm (3/16 in)

    (r) 30 mm (1 3/16 in) or longer


    Reference: Hole on the bottom of the wireless amplifier

    Illustration indicating the dimensions of the hole on the rear of the bar speaker. (s) represents the width of the upper part of the hole. (t) represents the width of the lower part of the hole.

    (s) 5.1 mm (7/32 in)

    (t) 10 mm (13/32 in)

    Note

    • Prepare screws (not supplied) that are suitable for the wall material and stability. The screw may damage the wall depending on the wall material.

  2. Fasten the screws on a wall as in the illustration below.

    Illustration indicating screw fastening position and fastening method. (u) represents the length from the bottom of the screw head to the wall. (v) represents the width of the two screw mounting positions. (w) represents the distance from the floor to the screw attachment point.

    (u) 1.6 mm to 2.6 mm (approx. 3/32 in)

    (v) 98 mm (3 7/8 in)

    (w) Attach the screws apart from the floor at more than 170 mm (6 3/4 in) so that the AC power cord (mains lead) can be attached to the wireless amplifier.

    Note

    • Fasten the screws securely in the wall beam.

  3. Connect the rear speaker cables and AC power cord (mains lead) (supplied) to the wireless amplifier.

    Connect the rear speaker cables attached to the rear of the rear speakers to the REAR SPEAKERS jack and AC power cord (mains lead) to the AC inlet on the wireless amplifier.

    Rear speaker cables

    AC power cord (mains lead)

  4. Hang the holes on the bottom of the wireless amplifier on the screws.

    Align the holes on the bottom of the wireless amplifier with the screws, then hang the wireless amplifier on the two screws.

  5. Connect the AC power cord (mains lead) connected to the wireless amplifier to the AC outlet (mains).

About sound field correction

In the following cases, we recommend performing [Speaker positioning and volume level settings](*) on the app to enjoy better sound.
  • When changing the position and installation method of the bar speaker, subwoofer, rear speakers
  • When changing the viewing environment, such as changing the layout of furniture
  • When changing the position of daily viewing

*Displayed by tapping [Settings] - [Sound Settings] - [Speaker positioning and volume level settings] on the remote control screen on the app.

TP1001843878