Mounting the Bar Speaker on a Wall

Mount the bar speaker under the TV mounted on a wall.

Bar speaker

Note

  • Hang the bar speaker horizontally on the reinforced wall.
  • Ask a Sony dealer or licensed contractor to install the bar speaker securely with full consideration of safety.
  • Sony shall not be held responsible for accidents or damage caused by improper installation, lack of installation strength, misuse, or natural disaster.
  • Two or more persons are required to hang the bar speaker for safety.
  1. Prepare two screws (not supplied) that are suitable for the holes on the rear of the bar speaker.

    The type and length of screws should be selected according to the wall to which they are to be installed.

    Illustration indicating the dimensions of a screw. (a) represents the diameter of the screw head. (b) represents the diameter of the screw. (c) represents the length of the screw excluding the head.

    (a) 6 mm to 9.5 mm (1/4 in to 3/8 in)

    (b) 4 mm (3/16 in)

    (c) 30 mm (1 3/16 in) or longer (approximate)


    Reference: Hole on the rear of the bar speaker

    Illustration indicating the dimensions of the hole on the rear of the bar speaker. (d) represents the width of the upper part of the hole. (e) represents the width of the lower part of the hole.

    (d) 5.1 mm (7/32 in)

    (e) 10 mm (13/32 in)

    Note

    • Prepare screws (not supplied) that are suitable for the wall material and stability. The screw may damage the wall depending on the wall material.
  2. Align the vertical line above the “ TV CENTER LINE” printed on the WALL MOUNT TEMPLATE (Paper) (supplied) with the center of the width of your TV.

    Center of the TV

    WALL MOUNT TEMPLATE

  3. Position the WALL MOUNT TEMPLATE so that the distance (f) between the “ BAR SPEAKER TOP LINE” printed on the WALL MOUNT TEMPLATE and the bottom of the TV is 70 mm (2 7/8 in) or more.

    Adhere the WALL MOUNT TEMPLATE on the wall with a commercially available adhesive tape, etc.

    WALL MOUNT TEMPLATE

    Adhesive tape, etc.

    (f) 70 mm (2 7/8 in)

    Note

    • When adhering the WALL MOUNT TEMPLATE on the wall, smooth it out fully.
  4. Fasten the screws prepared in step 1 securely into the screw marks on the “ SCREW LINE” printed on the WALL MOUNT TEMPLATE.

    Illustration indicating screw fastening position and fastening method. (g) represents the width of the two screw mounting positions. (h) represents the distance from the center of the template to the screw attachment point. (i) represents the length from the bottom of the screw head to the wall.

    Screws

    Marks

    (g) 630 mm (24 3/4 in)

    (h) 315 mm (12 3/8 in)

    (i) 13.5 mm to 14.5 mm (approx. 9/16 in)

    Note

    • Fasten the screw securely in the wall beam.
  5. Remove the WALL MOUNT TEMPLATE.
  6. Connect the HDMI cable(*) to the HDMI OUT (TV (eARC/ARC)) jack on the bar speaker.

    HDMI cable

    *The inclusion of an HDMI cable varies by country/region or retailer.

  7. Connect the AC power cord (mains lead) (supplied) to the AC inlet on the bar speaker.

    AC power cord (mains lead)

  8. Hang the holes on the rear of the bar speaker on the screws.

    Align the holes on the rear of the bar speaker with the screws, then hang the bar speaker on the two screws.

  9. Connect the HDMI cable connected to the bar speaker to the eARC/ARC HDMI input jack on the TV.
  10. Connect the AC power cord (mains lead) connected to the bar speaker to the AC outlet (mains).
  11. Perform [Speaker positioning and volume level settings](**) on the app in the following cases.
    • Changing the position and installation method of the bar speaker and subwoofer
    • When changing the position of daily viewing
    • When changing the viewing environment, such as changing the layout of furniture

    **Displayed when you tap [Settings] - [Sound Settings] - [Speaker positioning and volume level settings] on the remote control screen on the app.

TP1002102536