Sending images to a smartphone (NFC One-touch Sharing)

With just one touch, you can connect this product and an NFC-enabled smartphone, and send an image displayed on the product screen directly to the smartphone. You can transfer still images, movies and slow-motion and quick-motion movies.

  1. Activate the NFC function of the smartphone.
    • On an iPhone, launch Imaging Edge Mobile, and then select [Connect with the camera through One-touch (NFC)] under [Connect with a new camera].
  2. Display a single image on the product.
  3. Touch the (N-Mark) on the camera to the smartphone for 1-2 seconds.

    The product and the smartphone are connected, and then the displayed image is sent to the smartphone.

    • Before you touch the smartphone, cancel the sleep and lock-screen functions of the smartphone.
    • The NFC function is available only when the (N-Mark) is displayed on the product.
    • To transfer two or more images, select MENU → (Network) → [Send to Smartphone Func.] → [Send to Smartphone] to select images. After the connection enabled screen appears, use NFC to connect the product and the smartphone.

About “NFC”

NFC is a technology that enables short-range wireless communication between various devices, such as mobile phones or IC tags, etc. NFC makes data communication simpler with just a touch on the designated touch-point.

  • NFC (Near Field Communication) is an international standard of short-range wireless communication technology.

Note

  • You can select an image size to be sent to the smartphone from [Original], [2M] or [VGA].
    To change the image size, refer to the following steps.
    • For an Android smartphone
      Start Imaging Edge Mobile, and change the image size by [Settings] → [Copy Image Size].
    • For iPhone or iPad
      Select Imaging Edge Mobile from Settings, and change the image size using [Copy Image Size].
  • RAW images are converted to JPEG format when they are sent.
  • Depending on the smartphone, the transferred movie may not be played back correctly. For example, the movie may not play smoothly, or there may be no sound.
  • If the Image Index is displayed on the product, you cannot transfer images using the NFC function.
  • If you cannot make a connection, do as the following:
    • Launch Imaging Edge Mobile on your smartphone, and then move the smartphone slowly toward the (N-Mark) of this product.
    • If the smartphone is in a case, remove it.
    • If the product is in a case, remove it.
    • Check whether the NFC function is activated on your smartphone.
  • When [Airplane Mode] is set to [On], you cannot connect the product and the smartphone. Set [Airplane Mode] to [Off].
Go to Page Top