Overview

The WD-01 Antenna Divider is an antenna divider for TV white space band wireless microphone systems.

Antenna output can be distributed to up to six receivers

The unit is equipped with two circuits that divides the signal received by a Sony antenna for up to six receivers.

A multi-channel diversity receiving system can be configured by connecting Sony DWX units (such as the DWR-R03D).

The divider output connectors of the unit have a built-in 50 Ω terminator. Unused divider connectors do not require connection of a 50 Ω terminator.

Antenna signal cascade output connector

Multiple WD-01 units can be connected in a cascade connection.

2-system antenna input connectors

The unit is equipped with two antenna input connectors for each system. This allows you to extend the range of your wireless microphone by connecting up to four antennas.

9 V/THRU/12 V booster switchable voltage power delivery

Supplies power to a booster amplifier for a connected antenna. The front panel switch can be switched between 9 V/THRU/12 V, depending on the operating voltage of your antenna or antenna booster. When the drive voltage is set to THRU, the booster gain setting can be changed by changing the output voltage in response to the antenna voltage setting from the receiver.

Note

  • If the output voltage from the receiver is 0 V, it will be 0 V. When supplying power at various voltages to multiple channels, the highest voltage has precedence.

EIA standard 19-inch rack mount (1U size)

TP1001803120