Settings Screen

Tap to display the Settings screen.

Configure the application settings on this screen.

Connection

Log in to C3 Portal or a Network RX Station. Enter the following items for each.

Note

  • It is recommended that you change the password at regular intervals for security.

C3 Portal

  • Host name: Enter the host name or IP address of C3 Portal.
  • User name: Enter your user name registered for this application in C3 Portal.
  • Password: Enter your password registered for this application in C3 Portal.
  • Display name: Enter the name of the mobile device to display in the C3 Portal user interface.
  • ID: Displays the ID used for C3 Portal device management. A value cannot be entered. You can press and hold the ID value to generate the ID again. If the ID is regenerated, the mobile device must be registered in C3 Portal again.
  • Login button: Log in to C3 Portal. If you are logging in for the first time, the mobile device must be registered in C3 Portal.

Network RX Station

  • CCM address: Enter the host name or IP address of the Connection Control Manager (CCM).
  • CCM port: Enter the port configured for this application in CCM.
  • User name: Enter your user name registered for this application in CCM.
  • Password: Enter your password registered for this application in CCM.
  • Display name: Enter the name of the mobile device to display in CCM.
  • ID: Displays the ID used for CCM device management. A value cannot be entered. You can press and hold the ID value to generate the ID again.
  • Login button: Log in to CCM.

Camera

  • Frame rate: Specify the frame rate. The frame rates that can be configured vary with each mobile device.
  • Image stabilization: Turn image stabilization on/off. Not configurable if “Not supported” is displayed.
  • Grid lines: Turn the display of grid lines on/off.

Audio

  • Muting: Turn audio muting on/off.

Streaming

  • Supported video codecs: Displays the video codecs supported by the mobile device being used.
  • Enable H.265/HEVC: Select to use H.265/HEVC for streaming. If the mobile device does not support H.265/HEVC, “Not supported” is displayed.

Note

  • Even if [Enable H.265/HEVC] is set to ON, streaming in H.265/HEVC does not occur if H.265/HEVC is disabled in C3 Portal or on the Network RX Station, or if the Network RX Station does not support H.265/HEVC.

Recording

  • Size: Select the resolution for recording.
  • Clip name: Set the naming format for clips (title, number suffix). The naming of recorded clips is in “<title>_<NumberSuffix>” format, where the number suffix increments with each clip that is recorded.

Hint

  • Clips are recorded in the following format.
    • File extension: MP4
    • Video encoding: H.264/AVC
    • Audio encoding: AAC
  • Clips are recorded with a variable frame rate.

File transfer

  • Auto upload: Place a check mark in the checkbox to automatically register recorded clips in the job list and upload.

About

  • End user license agreement: Display the End User License Agreement.
  • Privacy policy: Display the privacy policy.
  • License information: Display license information.

Help

Display the Help (this document).

Tap the (Camera) button to return to the camera screen.

Go to Page Top