Feeding power to other devices
- Turn on this unit (WG-C20).
-
Connect the included USB cable* to the device you want to charge.
You should connect the USB terminal of the other device and the USB A port of this unit.
This unit starts charging the other device.
*For iOS devices, use the dedicated cable bundled with your device when you purchased it.
- Press the
(Power) button to switch the mode to feed power.
See Switching to power feeding mode.
You can feed power in wireless LAN mode and power feeding mode.
- When the charging of the other device is complete, remove the USB cable from this unit and the other device.
Note
- You should charge this unit beforehand. If the remaining battery charge is not sufficient, this unit will not be able to feed power.
- Be sure to insert the connector in the correct way. Pushing the connector forcibly into the port will damage the port and may result in a malfunction.
Hint
- The maximum output current from the USB port of this unit is 1.5 A in power feeding mode and 500 mA in wireless LAN mode. If an abnormal current is detected, the power feeding is stopped for safety.
- If your device supports high power feeding, using the power feeding mode can shorten the charging time.
- Before feeding power to another device, be sure to check the voltage and current ratings of the device.
- Correct operation is not guaranteed if a USB hub or USB extension cable is used.
- The unit may become warm during use. This is not a malfunction.
- The wireless LAN function is not available while feeding power to another device.