Terminating the Stereo Pair function

To terminate the Stereo Pair function, follow the procedure below.

  1. Press and hold the(BLUETOOTH)/ST PAIR (Stereo Pair) button on the bottom of the speaker on one of the speakers for about 3 seconds until you hear a notification sound*.

Hint

  • Turning off the speaker does not terminate the Stereo Pair function. When the speaker is turned back on, it attempts to establish a connection for the Stereo Pair function. To use the Stereo Pair function, turn on the other speaker within 1 minute.

    While the BLUETOOTH standby function is activated both on the 2 speakers, however, turning on either speaker also turns on the other automatically and establishes a connection for the Stereo Pair function between the 2 speakers.

  • If you want to use only one of the speakers that were used with the Stereo Pair function, press the(power) button to turn on the speaker, then press and hold the(BLUETOOTH)/ST PAIR (Stereo Pair) button on one of the speakers until you hear a notification sound to terminate the Stereo Pair function.

  • To terminate the Stereo Pair function while using 2 speakers, press the(BLUETOOTH)/ST PAIR (Stereo Pair) button. A notification sound is heard, and then the Stereo Pair function is terminated.

  • By using “Sony | Music Center,” you can establish a connection for the Stereo Pair function or terminate the Stereo Pair function.

Go to Page Top