Selecting the BLUETOOTH audio streaming playback quality (Codec)

The “Priority on sound quality” and “Priority on stable connection” modes are available as options for the playback quality of BLUETOOTH audio streaming. “Priority on sound quality” enables you to perform playback settings of, not only SBC, but also AAC and LDAC, so that you can enjoy high quality sound via BLUETOOTH connection, whereas “Priority on stable connection” provides you more stable BLUETOOTH audio streaming. “Priority on stable connection” is the default setting.

Supported Codecs

  • Priority on stable connection (default setting): SBC is selected.
  • Priority on sound quality: Optimal codec is automatically selected from AAC, LDAC, and SBC.
  1. Connect the speaker to an AC outlet via the AC adaptor (supplied) or a USB AC adaptor (commercially available), or connect it to a booted computer.

    Note

    • Do not turn on the speaker.
  2. Change the sound quality.

    When using the buttons of the speaker

    1. While holding the + (volume) button, press the (power) button/ PAIRING button until the (BLUETOOTH) indicator flashes in blue.
      When the setting is changed to the “Priority on stable connection” mode, the (BLUETOOTH) indicator flashes 3 times in blue. When the setting is changed to the “Priority on sound quality” mode, the (BLUETOOTH) indicator flashes twice in blue.


    When using “Sony | Music Center”

    1. Tap [Music Center] on your smartphone, iPhone, etc. to start up the application.

      Music Center

    2. Tap [SRS-XB41].
    3. Tap [Settings] – [Other Settings] – [Bluetooth Codec], and then select a codec.
      [AUTO]: Priority on sound quality
      [SBC]: Priority on stable connection

Note

  • Noise or sound interruption may occur in the [AUTO] (Priority on sound quality) mode, depending on the setting of your BLUETOOTH device and ambient conditions. In this case, change the speaker to the [SBC] (Priority on stable connection) mode.
Go to Page Top