Pairing and connecting with BLUETOOTH devices

When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.

Before operating the speaker, be sure to do the following:

  • Place the BLUETOOTH device within 1 m (3.3 feet) from the speaker.

  • Connect the speaker to an outlet via the AC power cord (supplied).

  • To avoid any sudden loud sound output from the speaker, turn down the volume of the BLUETOOTH device that you connect with the speaker, or stop playback on the device.

    Depending on the paired BLUETOOTH device, the volume of the BLUETOOTH device may be synchronized with the volume of the speaker when you start playing music after a BLUETOOTH connection is established.

  • Prepare the operating instructions supplied with the BLUETOOTH device for reference.

  1. Touch and hold the speaker's BLUETOOTH button for more than 2 seconds.

    The BLUETOOTH indicator (blue) flashes quickly and the speaker enters pairing mode.

    Hint

    • If the BLUETOOTH indicator does not flash, the speaker may already be connected to the BLUETOOTH device. If this is the case, once you have turned off the speaker, do the operations for pairing again.

  2. Perform the pairing procedure on the BLUETOOTH device to detect the speaker.

    When a list of detected devices appears on the display of the BLUETOOTH device, select the speaker's name ([SRS-RA3000] or the one you provided during the Wi-Fi network setup).

    If passkey* entry is prompted on the BLUETOOTH device, enter “0000.”

    * A passkey may also be called “Passcode,” “PIN code,” “PIN number” or “Password.”

  3. Follow the instructions on the BLUETOOTH device screen to establish a BLUETOOTH connection.

    When the BLUETOOTH connection is established, the speaker beeps and the BLUETOOTH indicator switches from flashing to a steady light.

Hint

  • For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device.

Note

  • If the speaker goes out of BLUETOOTH pairing mode before you finish the procedure and the name of the speaker does not appear on the BLUETOOTH device screen, repeat the procedure from step1.

  • Once the speaker is paired with the BLUETOOTH device, there is no need to pair them again, except in the following cases:

    • Pairing information is deleted due to repair work, etc.

    • The pairing information of the speaker is deleted from the BLUETOOTH device.

    • The speaker is initialized.

      All pairing information will be deleted.

  • Video viewing using a BLUETOOTH connection is not recommended. A slight misalignment occurs in video and audio.

  • This speaker does not support the BLUETOOTH profile HFP (Hands-free Profile)/HSP (Headset Profile) that enables hands-free calls with a BLUETOOTH mobile phone.

Go to Page Top