About the indicators

Status indicator

Turns off The speaker is turned off.
Lights up (white) The speaker is turned on.
Lights up (red) The speaker is turned off. The BLUETOOTH standby function is activated.
Lights up (pink) The speaker is turned off. Either of the Auto Play is scheduled to be activated and the speaker is in BLUETOOTH standby mode.
Flashes (white)
  • Each time you press –/+ (volume) buttons, the indicator flashes once.

  • When you operate the –/+ (volume) buttons and the volume is set at the lowest (0) or highest (50 for music playback/15 for phone calling) level, the indicator flashes 3 times.

  • When the – (volume) button and the + (volume) button are pressed and held simultaneously for about 5 seconds and the Automatic Power Off function is turned off, the indicator flashes 3 times.

  • When the – (volume) button and the + (volume) button are pressed and held simultaneously for about 5 seconds and the Automatic Power Off function is turned on, the indicator flashes twice.

  • When the speaker is placed on the charging cradle and battery charging starts, the indicator flashes twice.

  • When the Quick Access fails to be activated or the(Quick Access) button is disabled, the indicator flashes 3 times.

  • When the Stereo Pair function cannot be used due to the old version of the speaker software, you hear voice guidance (The Stereo Pair is not available. Please open the Sound Connect and update the speaker software.) and the indicator flashes 3 times. Update the speaker software.

Flashes slowly (white)
  • The speaker is waiting for a BLUETOOTH connection to be established.

  • The indicator starts flashing when one of the functions relating to music playback (the Quick Access, the Auto Switch, the Auto Play, etc.) is activated and stays flashing until music playback starts.

  • An update is being applied to the built-in software.

Flashes slowly (orange) The built-in battery is running at less than 20% and needs to be charged.
Double flashes (orange) An abnormality in the interior temperature or in the built-in rechargeable battery is detected. Turn off the speaker, disconnect the USB cable, wait for a while, and then restart the speaker. For details, see “Notes on charging.”
Flashes 3 times (orange) and turns off When the indicator flashes 3 times and the speaker turns off after you turn on the speaker, the built-in battery is empty and needs to be charged.

Charge indicator (orange)

Turns off The speaker is finished with charging.
Lights up The speaker is being charged.
Flashes slowly The built-in battery is running at less than 20% and needs to be charged.
Flashes twice The speaker is on the charging cradle and battery charging has started.
Flashes 3 times and turns off When the charge indicator flashes 3 times and the speaker turns off after you turn on the speaker, the built-in battery is empty and needs to be charged.

Note

  • As long as the speaker is connected to an AC outlet by a USB AC adaptor (commercially available), the speaker's built-in battery is capable of charging itself even while the speaker is turned on.

    Depending on the usage of the speaker, however, it may take a long time before charging completes. It is recommended that you turn off the speaker before battery charging.

  • Depending on the type or specifications of the USB AC adaptor, if you use the speaker at a loud volume, the remaining power of the rechargeable built-in battery may decrease or the speaker may turn off even while the speaker is connected to an AC outlet by the USB AC adaptor. This, however, does not indicate a malfunction. If such a case occurs, turn off the speaker and let the battery fully charge itself before you use the speaker.

  • If the ambient temperature is extremely low or high, the built-in battery will stop charging itself for safety reasons. It may also stop charging if charging continues for a long period of time. If such a case occurs, bring the temperature up or down to an operating temperature between 5 °C and 35 °C (41 °F and 95 °F), disconnect and reconnect the USB cable, and then let the battery charge itself once again.

(BLUETOOTH) indicator (blue)

Lights up The speaker is connected to a BLUETOOTH device.
Double flashes

The speaker enters the pairing mode.

Flashes slowly

The speaker is waiting for a BLUETOOTH connection to be established.

ST PAIR (Stereo Pair) indicator (white)

Flashes slowly The speaker is waiting for a connection for the Stereo Pair function to be established. The ST PAIR (Stereo Pair) indicator flashes when the connection for the Stereo Pair function fails.
Lights up The Stereo Pair function is used on the speaker.