Mounting on a Wall Directly

By using a commercially-available screw, you can mount the rear speaker on a wall directly. If you want to turn the rear speaker toward the viewing position, you can also mount the rear speaker on a wall with the wall mounting bracket.
Mounting on a Wall with the Supplied Wall Mounting Bracket

Note

  • Prepare commercially-available screws that are suitable for the wall material and stability. The screw may damage the wall depending on the wall material.
  • Fasten the screws securely in the wall beam.
  • Hang the rear speakers horizontally on the reinforced wall.
  • Ask a Sony dealer or licensed contractor to install the rear speakers securely with full consideration of safety.
  • Sony shall not be held responsible for accidents or damage caused by improper installation, lack of installation strength, misuse, or natural disaster.

Rear speakers

  1. Prepare a commercially-available screw that is suitable for the wall mounting hole on the rear of the rear speaker.

    Illustration indicating the dimensions of a screw. (a) represents the diameter of the screwhead. (b) represents the diameter of the screw. (c) represents the length of the screw excluding the head.

    (a) 6 mm to 9.5 mm (1/4 in to 3/8 in)

    (b) 4 mm (3/16 in)

    (c) 30 mm (1 3/16 in) or longer (approximate)


    Wall mounting hole on the rear of the rear speaker

    Illustration indicating the dimensions of the hole. (d) represents the width of the upper part of the hole. (e) represents the width of the lower part of the hole.

    (d) Approx. 4.5 mm (3/16 in)

    (e) Approx. 10 mm (13/32 in)

  2. Fasten the screw to a wall.

    Illustration indicating the length from the bottom of the screw head to the wall (f). Fasten a screw to a wall. Do not drive the entire length of the screw into the wall and leave approximately 12 mm (1/2 inches) from the bottom of the screw head to the wall.

    (f) Approx. 12 mm (1/2 in)

  3. Remove the cover on the rear of the rear speaker by inserting a flathead screwdriver, etc. into the lower side of the cover.

    Cover

  4. Check the labels on the bottom of the rear speakers to identify the left and right, and hang the wall mounting hole on the rear of the rear speaker on the screw.
    • : Left
    • : Right

Note

  • Keep the cover that was removed in step 3 for use when you do not mount the rear speaker on a wall.
TP1002074381