Specifications
Rear speaker (YY2101C)
The following descriptions are the specifications per speaker.
Top speaker section
80 mm (3 1/4 in) Cone type (1)
Speaker system
Acoustic suspension type
Front speaker section
Tweeter
16 mm (21/32 in) Soft dome type (1)
Woofer
80 mm (3 1/4 in) Cone type (1)
Speaker system
Passive radiator type
Wireless LAN section
Communication system
IEEE 802.11 a/b/g/n/ac/ax
BLUETOOTH section
Output
BLUETOOTH Specification Power Class 1.5
Maximum communication range
Line of sight approx. 30 m (98.4 ft)*
* The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone use, reception sensitivity, the operating system, software applications, etc.
Frequency band
2.4 GHz band (2.400 0 GHz - 2.483 5 GHz)
Wireless transmitter/receiver section
Communication system
Wireless Sound Specification
Modulation method
OFDM
General
Power consumption
On: 22 W
Network standby mode: 1.8 W or less
Turned off: 0.3 W or less
When the [Auto Standby] function is enabled, if the product is not being operated and there is no signal input for about 20 minutes, the product automatically enters the network standby mode or turned off.
Disabling the [Auto Standby] function will increase the power consumption of this product.
When this product is connected to home audio equipment, the power of the product is controlled in conjunction with the auto standby function of home audio equipment.
Dimensions* (W × H × D)
* Including projecting parts and controls.
Speaker:
Approx. 154 mm × 286 mm × 154 mm (6 1/8 in × 11 3/8 in × 6 1/8 in)
Speaker with the Wall mounting bracket:
Approx. 154 mm × 294 mm × 167 mm (6 1/8 in × 11 5/8 in × 6 5/8 in)
Mass
Speaker:
Approx. 2.7 kg (5 lb 16 oz)
Speaker with the Wall mounting bracket:
Approx. 2.9 kg (6 lb 7 oz)
Note
- Design and specifications are subject to change without notice.
- Refer to the Reference Guide included with your product, which may contain specification information not listed above.