Wired LAN (USB-LAN)

Configures a wired LAN. You can connect this product to a network via wired LAN by connecting a commercially available USB-LAN conversion adaptor to the USB Type-C terminal on the product.

  1. MENU → (Network) → [Wired LAN] → desired setting.

Menu item details

IP Address Setting:
Sets whether to configure the IP address for the wired LAN automatically or manually. ([Auto]/[Manual])
Display Wired LAN Info.:
Displays wired LAN information for this product such as the MAC address or IP address.


IP Address:
If you are entering the IP address manually, enter the fixed address.
Subnet Mask/Default Gateway/Primary DNS Server/Second DNS Server:
If you have set [IP Address Setting] to [Manual], enter each address according to your network environment.

Hint

  • We recommend that you use a gigabit ethernet adaptor for USB Type-C connections.

Note

  • When connecting via a wired LAN, use a trusted network. We do not recommend using public networks that are not secure or networks with unknown origins.
  • When using a network other than a trusted one, there is a risk of DoS (Denial of Service) attacks and loss of functionality. If you notice anything unusual, immediately disconnect the camera from the network.
  • When entering an IP address in [IP Address Setting], the number/types of characters that can be entered are as follows.
    • IP Address / Subnet Mask / Default Gateway / Primary DNS Server / Second DNS Server: The maximum length is 15 characters. The types of characters that can be entered are numbers and “.” only.
  • Not all types of USB-LAN conversion adaptors are guaranteed to operate properly.
TP1001532842