Shoot Mode: Program Auto

still image, movie, slow&quick motion

Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value).
You can set shooting functions such as [ISO].

  1. Set the Still/Movie/S&Q switch to the desired shooting mode.
    • If S&Q (slow-motion/quick-motion) is selected and [Shoot Mode Sel. Screen] is set to [Display], the [ Shoot Mode] screen in Step 2 will be displayed at this point.
  2. MENU → (Shooting) → [Shooting Mode] → [Shoot Mode]/[Shoot Mode]/[ Shoot Mode] → [Program Auto].
  3. Set the shooting functions to your desired settings.
  4. Adjust the focus and shoot the subject.

Program Shift (only during still image shooting)

When you are not using a flash, you can change the shutter speed and aperture (F-value) combination without changing the appropriate exposure set by the camera.

Turn the control dial to select the aperture value and shutter speed combination.

  • “” on the screen changes to “” when you turn the control dial.
  • To cancel program shift, set the shooting mode to other than [Program Auto], or turn off the camera.
  • If [Footer Icon Touch] under [Shooting Screen] is set to [On], you can also perform program shift by touching the shutter speed and aperture display area at the bottom of the screen.

Note

  • According to the brightness of the environment, the program shift may not be used.
  • Set the shooting mode to another one than “P” or turn off the power to cancel the setting you made.
  • When the brightness changes, the aperture (F-value) and shutter speed also change while maintaining the shift amount.
TP1001540133