Pairing and connecting with a Bluetooth device

The operation to register the device that you wish to connect to is called “pairing”. First, pair a device to use it with the headset for the first time.

Before starting the operation, make sure of the following:

  • The Bluetooth device is placed within 1 m (3.2 ft) of the headset.
  • The headset is charged sufficiently.
  • The operating instructions for the Bluetooth device is in hand.
  1. Check the status of the headset.

    When you pair the headset with a device for the first time after purchase or after initializing the headset (when there is no pairing information on the headset): Proceed to step 2.

    When you pair a second or subsequent device (the headset has pairing information for other devices): Proceed to step 3.

  2. (If you selected “when there is no pairing information on the headset” in step 1)
    Remove both headset units from the charging case.

    The headset turns on automatically.

    The headset enters pairing mode automatically.

    You will hear a notification sound and the voice guidance say “Pairing” from both headset units at the same time.

    Proceed to step 4.

  3. (If you selected “the headset has pairing information for other devices” in step 1)
    Set the headset into the charging case, leave the charging case lid open, and press and hold the pairing button on the back of the charging case for about 5 seconds or more.

    Hint

    • Leave the charging case lid open. The headset does not enter pairing mode with the charging case lid closed.

    The indicator (blue) on the charging case repeatedly flashes twice in a row and the headset goes into pairing mode.

    You can remove the headset from the charging case after entering pairing mode.

  4. Perform the pairing procedure on the Bluetooth device to search for this headset.

    [WF-C510] will be displayed on the list of detected devices on the screen of the Bluetooth device.

    If [WF-C510] is not displayed, try again from step 2 or step 3.

  5. Select [WF-C510] displayed on the screen of the Bluetooth device for pairing.

    If Passkey* input is required, input “0000”.

    *A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.

  6. Make the Bluetooth connection from the Bluetooth device.

    The headset and Bluetooth device are connected to each other.

    Some devices automatically connect with the headset when pairing is complete.

    When the headset is placed in the charging case, the indicator (blue) on the charging case flashes 10 times.

    When the headset is being removed from the charging case, you will hear a notification sound indicating that the connection is established from both headset units (or from the headset unit removed from the charging case when only one headset unit is removed) at the same time.

    If they are not connected, see “Connecting to a paired Bluetooth device”.

Hint

Note

  • If pairing is not established within 5 minutes, pairing mode is canceled. In this case, start the operation again from step 2 or step 3.
  • Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
    • Pairing information has been deleted after repair, etc.
    • When a 9th device is paired
      The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration information of the paired device with the oldest connection date is overwritten with the information for the new device.
    • When the pairing information for the headset has been deleted from the connected Bluetooth device
    • When the headset is initialized
      All of the pairing information will be deleted. In this case, delete the pairing information for the headset from the connected device and then pair them again.
  • The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.