PWS-110RX1A | Help Guide | Setup and Operation Flow

Setup and Operation Flow

Perform setup and operation in the following sequence to use this system. If using C3 Portal, the unit and transmitting devices must be registered in C3 Portal beforehand. For details about registering, refer to the C3 Portal Help Guide (Setup).

Setup
1. Configuring Network Settings
  
  Configure the required network settings to connect the PWS-110RX1A units installed within a broadcasting station with the camcorders in the field or with XDCAM pocket.
2. Configuring Connection Control Manager Preferences
  
  Configure the preferences on one PWS-110RX1A unit within the system to function as the Connection Control Manager.
3. Registering Receivers
  
  Register all PWS-110RX1A units that will operate as streaming receivers in the Connection Control Manager using the Initialization Tool.
4. Configuring Connection Control Manager Receiver and Output Settings
  
  Launch the Connection Control Manager admin screen, and configure the streaming output settings.
Operation in the field
- Setting the Wireless Adapter to Network Client Mode
  When shooting using a camcorder with a wireless adapter attached, set the wireless adapter to network client mode.
- Setting the Camcorder to Network Client Mode
  When shooting using a network-enabled camcorder, set the camcorder to network client mode.
- Configuring XDCAM pocket
  When using XDCAM pocket, launch XDCAM pocket on a smartphone.
Operation at the broadcasting station
1. Launching the Connection Control Manager Admin Screen
  
  Log in to the Connection Control Manager from a web browser on a client PC that is connected to the same network as the PWS-110RX1A that is running the Connection Control Manager.
2. Starting Streaming
  
  Start streaming distribution of video received from the camcorder in the field using the Connection Control Manager.

Go to Page Top