Listening to music wirelessly with two speakers (Speaker Add function)

By connecting two SRS-XB10 speakers via BLUETOOTH, you can select audio reproduction between stereo mode (stereo sound) and double mode (monaural sound). To use this function, two SRS-XB10 speakers are required.

Select from the following two playback methods.

Double mode

Both speakers play the same sound. Double mode is the initial setting.

Stereo mode

One speaker plays the sound on the right channel (right side), while the other speaker plays the sound on the left channel (left side) for stereo playback between the speakers.

Note

  • Turn off both speakers before setting up the Speaker Add function.
  1. Set up the first speaker.
    1. Press the (power) PAIRING button on one of the speakers to turn it on.

      The (BLUETOOTH) indicator begins to flash in white.

    2. Press and hold the ADD button for about 3 seconds until a beep is heard.

      The (BLUETOOTH) indicator keeps flashing.

  2. Set up the second speaker.
    1. Press the (power) PAIRING button on the second speaker to turn it on.

      The (BLUETOOTH) indicator of the speaker begins to flash in white.

    2. Press and hold the ADD button for about 3 seconds until a beep is heard.

      When the BLUETOOTH connection is established, the (BLUETOOTH) indicators of the 2 speakers flash in white. The L/R indicators then light up.

      Hint

      • If the 2 speakers quickly make a BLUETOOTH connection, both the (BLUETOOTH) indicator and the L/R indicators may light up.
      • Set up the second speaker within 1 minute. If you do not set it up within 1 minute, the setting of the first speaker will be canceled.
  3. Make a BLUETOOTH connection with a BLUETOOTH device.

    When the (BLUETOOTH) indicator of the speaker stops flashing and lights up, the BLUETOOTH connection is established.

  4. Start playback on the BLUETOOTH device, and adjust the volume to moderate level.
  5. Press the –/+ (volume) buttons on one of the speakers to adjust the volume.

    Volume adjustment of one speaker is reflected on the other.

Hint

  • When making or receiving a call, only operate the speaker where the (BLUETOOTH) indicator lights up.
  • If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the BLUETOOTH device that is connecting with the speaker, there may be distorted sound or noise in the speaker output. In this case, terminate the BLUETOOTH connection between the BLUETOOTH device and other BLUETOOTH device(s).
  • The Speaker Add function can be used even when connecting a portable audio device, etc. to the speaker’s AUDIO IN jack and playing it. If the device that is connected to the AUDIO IN jack is monaural, sound will only be output from the speaker whose L indicator lights up.

Note

  • If you reset or initialize one of the two speakers while using the Speaker Add function, make sure to turn off the other speaker. If you do not turn off the other speaker before restarting the Speaker Add function, there may be problems in making a BLUETOOTH connection and outputting sound.
Go to Page Top