Pairing and connecting with BLUETOOTH devices

When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.

Before operating the speaker, be sure to do the following:

  • Place the BLUETOOTH device within 1 m (3.2 ft) from the speaker.
  • Connect the speaker to an AC outlet via the AC adaptor (supplied) or charge the built-in battery sufficiently.
  • To avoid any sudden loud sound output from the speaker, turn down the volume of the BLUETOOTH device that you connect with the speaker, or stop playback on the device.
  • Depending on the paired BLUETOOTH device, the volume of the BLUETOOTH device may be synchronized with the volume of the speaker when you start playing music after a BLUETOOTH connection is established.
  1. Press and hold the (power)/ PAIRING button for about 3 seconds until the speaker beeps and the (BLUETOOTH) indicator flashes quickly in blue.

    The speaker enters pairing mode.

  2. Perform the pairing procedure on the BLUETOOTH device to detect the speaker.

    When a list of detected devices appears on the display of the BLUETOOTH device, select the speaker you set up for the Wi-Fi connection.

    2 devices with the same name may appear on the display of the BLUETOOTH device. If this occurs, try connecting to both.

    If passkey* entry is prompted on the BLUETOOTH device, enter “0000.”

    * A passkey may also be called “Passcode,” “PIN code,” “PIN number” or “Password.”

  3. Follow the instructions on the BLUETOOTH device screen to establish a BLUETOOTH connection.

    When the BLUETOOTH connection is established, the speaker beeps and the (BLUETOOTH) indicator stops flashing and stays lit.

Hint

  • For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device.

Note

  • The speaker goes out of BLUETOOTH pairing mode in about 3 minutes and the (BLUETOOTH) indicator goes out. If the speaker goes out of BLUETOOTH pairing mode before you finish the procedure, repeat the procedure from step .

  • Once the speaker is paired with the BLUETOOTH device, there is no need to pair them again, except in the following cases:

    • Pairing information is deleted due to repair work, etc.

    • The pairing information of the speaker is deleted from the BLUETOOTH device.

    • The speaker is initialized.

      All pairing information will be deleted.

  • Video viewing using a BLUETOOTH connection is not recommended. A slight misalignment occurs in video and audio.

  • This speaker does not support the BLUETOOTH profile HFP (Hands-free Profile)/HSP (Headset Profile) that enables hands-free calls with a BLUETOOTH mobile phone.

Go to Page Top