Using the BLUETOOTH standby (auto power on) function

When the BLUETOOTH standby function is activated, the speaker turns on automatically by operating a BLUETOOTH device, and starts the BLUETOOTH connection.

Before operating the speaker, note the following:

  • The BLUETOOTH standby function is activated only while the speaker is connected to an AC outlet by a USB AC adaptor (commercially available). While the speaker is running only on power from the rechargeable built-in battery, the BLUETOOTH standby function is deactivated.

  • Pair the speaker with a BLUETOOTH device in advance. If pairing information is not stored in the speaker, such as when the speaker is used for the first time after purchase, the speaker will not enter the BLUETOOTH standby mode.

  1. Turn on the speaker.

    The(power) indicator lights up in green.

  2. Tap [Music Center] on your smartphone, etc. to start up the application.

    Music Center

  3. Tap [SRS-XE300].

  4. Tap [Settings].

  5. Tap [Power Option].
  6. Tap the check box for [Bluetooth Standby] to select the check box.

    The selected check box indicates that the BLUETOOTH standby function is activated.

  7. Go back to the top screen for the selected speaker (the screen in stepnumber 4).

    The new setup is applied.

To deactivate the BLUETOOTH standby function

In stepnumber 6above, tap the check box for [Bluetooth Standby] to deselect the check box, and go back to the top screen for the selected speaker (the screen in stepnumber 4) to deactivate the BLUETOOTH standby function.

Hint

  • When the BLUETOOTH standby function is activated, the(power) indicator lights up in orange while the speaker is turned off. (Provided that the speaker is connected to an AC outlet by a USB AC adaptor (commercially available).)

Go to Page Top