Specifications
Bar speaker (YY2088C1/ YY2092C1)
Front speaker section
Speaker
46 mm × 54 mm (1 13/16 in × 2 1/4 in) cone type
Speaker system
Acoustic suspension type
Center speaker section
Speaker
46 mm × 54 mm (1 13/16 in × 2 1/4 in) cone type
Speaker system
Acoustic suspension type
Top speaker section
Speaker
46 mm × 54 mm (1 13/16 in × 2 1/4 in) cone type
Speaker system
Acoustic suspension type
BLUETOOTH section
Output
BLUETOOTH Specification Power Class 1
Maximum communication range
Line of sight approx. 25 m (82.0 ft)*
* The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone use, reception sensitivity, the operating system, software applications, etc.
Maximum number of devices to be registered
9 devices: BLUETOOTH Low Energy (Connection with Sony | BRAVIA Connect)
9 devices: BLUETOOTH Classic (A2DP)
Frequency band
2.4 GHz band (2.400 0 GHz - 2.483 5 GHz)
Modulation method
FHSS
Compatible BLUETOOTH profile*
* A BLUETOOTH profile standardizes functions according to the characteristics of BLUETOOTH devices.
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported codec*
* Codec is an audio signal compression and conversion format
SBC (Subband Codec)
AAC (Advanced Audio Coding)
Corresponding content protection
SCMS-T
Transmission range (A2DP)
20 Hz - 20 000 Hz (Sampling frequency 44.1 kHz, 48 kHz)
USB section
(USB) port
Type A (For software update only)
HDMI section
Connector
Type A (19pin)
General
Input
TV IN (OPTICAL)
Output
HDMI OUT (TV (eARC/ARC))
Power consumption
On: 35 W
Network standby mode ([Bluetooth Standby] is set to ON): 2.0 W or less
Standby mode ([Bluetooth Standby] is set to OFF): 0.5 W or less
When the [Auto Standby] function is enabled, if the product is not being operated and there is no signal input for about 20 minutes, the bar speaker automatically enters the network standby mode or standby mode.
Disabling the [Auto Standby] function will increase the power consumption of this product.
Dimensions* (W x H x D)
* Not including projection portion
Bar speaker:
Approx. 950 mm × 64 mm × 110 mm (37 1/2 in × 2 5/8 in × 4 3/8 in)
Bar speaker with the Foot:
Approx. 950 mm × 77 mm × 110 mm (37 1/2 in × 3 1/8 in × 4 3/8 in)
Mass
Bar speaker:
Approx. 3.1 kg (6 lb 14 oz)
Bar speaker with the Foot:
Approx. 3.1 kg (6 lb 14 oz)
Subwoofer (YY2088C2/ YY2092C2)
Speaker section
Speaker
160 mm (6 3/8 in) cone type
Speaker system
Subwoofer speaker system bass reflex type
General
Power consumption
On: 20 W
Network standby mode (power indicator is lit in red): 2.0 W or less
Turned off (power indicator is off): 0.3 W or less*
* When you press and hold the LINK for 2 seconds or more and then release your finger, the speaker shifts to the power off mode and the power indicator is turned off. Press the LINK to use the speaker again.
When the [Auto Standby] function is enabled, if the product is not being operated and there is no signal input for about 20 minutes, the subwoofer automatically enters the network standby mode.
Disabling the [Auto Standby] function will increase the power consumption of this product.
Dimensions* (W x H x D)
* Not including projection portion
Approx. 210 mm × 388 mm × 388 mm (8 3/8 in × 15 3/8 in × 15 3/8 in)
Mass
Approx. 7.7 kg (16 lb 16 oz)
Wireless transmitter/receiver section
Frequency band
2.4 GHz band (2.400 0 GHz - 2.483 5 GHz)
Modulation method
GSFK
Note
- Design and specifications are subject to change without notice.
- Refer to the Reference Guide included with your product, which may contain specification information not listed above.