Connecting to a paired computer (Mac)

Compatible OS

macOS (version 12 or later)

Before starting the operation, make sure of the following:

  • Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to the operating instructions supplied with the computer.
  • Set the computer speaker to the ON mode.
    If the computer speaker is set to the “OFF” mode, no sound can be heard from the headset.

    Computer speaker in the ON mode

  1. Wake the computer up if the computer is in standby (sleep) or hibernation mode.
  2. Remove the headset units from the charging case.

    The headset turns on automatically.

  3. Put the headset units into your ears.

    When the headset has automatically connected to the last connected device, you will hear a notification sound indicating that the connection is established from both headset units at the same time. When you are wearing only one headset unit, you will hear the notification sound from the headset unit you are wearing.

    Check the connection status on the computer. If it is not connected, proceed to step 4.

  4. Select [ (System Preferences)] - [Bluetooth] from the Dock at the bottom of your computer screen.

  5. Click [LinkBuds Fit] on the [Bluetooth] screen while pressing the computer Control button and select [Connect] from the pop-up menu.

    You will hear a notification sound indicating that the connection is established from both headset units at the same time. When you are wearing only one headset unit, you will hear the notification sound from the headset unit you are wearing.

Hint

  • The operation above is an example. For more details, refer to the operating instructions supplied with the computer.

Note

  • If the music playback sound quality is poor, check that the A2DP function which supports music playback connections is enabled in the computer settings. For more details, refer to the operating instructions supplied with the computer.
  • If the last connected Bluetooth device is placed near the headset, the headset may automatically connect to the device when you turn on the headset and may not connect to another device.
    If this occurs, cancel the Bluetooth connection on the last connected device.
  • If you cannot connect your computer to the headset, delete the headset pairing information on your computer and perform pairing again. As for the operations on your computer, refer to the operating instructions supplied with the computer.