Listening to music of a portable audio device, etc.

You can use the speaker by connecting a portable audio device, etc., to the speaker using an audio cable (commercially available).

  1. Connect a device to the AUDIO IN jack with an audio cable (commercially available).

    For connection, use an audio cable with a stereo mini plug (no resistance)*1 at both ends.

    *1 If you use an audio cable (with stereo mini plugs) with significant resistance, the sound may be lower. Therefore, make sure you use a cable (with stereo mini plugs) without resistance.

  2. Turn on the speaker.

    The(power) indicator lights up in white*2.

    *2 Depending on the Sound Mode, the color of the(power) indicator varies. For details, refer to the following topic.
    About the indicators

  3. Turn on and start playback on the connected device.
  4. Adjust the volume to a moderate level on the connected device.
  5. Press the –/+ (volume) buttons to adjust the volume.

    When you press the –/+ (volume) buttons, the (power) indicator flashes once. When you set the volume to the maximum or minimum level on the speaker, the(power) indicator flashes 3 times.

Hint

  • When you cannot hear the sound, raise the volume on the connected device.

  • If the BLUETOOTH connection is active between the speaker and a mobile phone (smartphone/iPhone) via HFP/HSP, you can use the hands-free function while listening to music of a portable audio device, etc. that is connected to the speaker’s AUDIO IN jack.

Note

  • If you connect an audio cable to the AUDIO IN jack, the output from the device connected to the AUDIO IN jack has priority, and you will not hear the sound from the BLUETOOTH device. The(BLUETOOTH) indicator lights up or flashes in blue to indicate the BLUETOOTH status. Absence of sound from the BLUETOOTH device does not indicate any trouble with the speaker.

  • Even when the audio cable is connected, you can switch to the BLUETOOTH mode on “Sony | Music Center,” and listen to music from the BLUETOOTH device connected via a BLUETOOTH connection.

  • When connecting a portable audio device to the AUDIO IN jack and playing music, you cannot use the buttons on the speaker to perform operations such as pause, skip to the beginning of the next track, and skip to the beginning of the current track.

  • Do not use the AUDIO IN jack in a place where water may splash. The supplied accessories and the connectors of this speaker (USB/AUDIO IN) are neither waterproof nor dust proof.

  • Be sure to close the cap completely after disconnecting the audio cable from the speaker.

Go to Page Top