Installing the Line-Array Speaker Manager application
- Join SLS-1A speakers together and connect them with audio devices.
- Find out the MAC address () of the SLS-1A speaker with which you connect your computer.
- Install the Line-Array Speaker Manager application on the computer.
The Line-Array Speaker Manager application can be downloaded from the website at:
- Connect the computer to the same network as the SLS-1A speaker, using an Ethernet cable.
Hint
-
There is no need to connect the computer directly with the SLS-1A speaker. When a network switch and a router are in use, you can connect the computer with the speaker by connecting the computer to the network switch and the router as well.
-
- Start the Line-Array Speaker Manager application.
The “Device Detection” window opens.
Make sure that the SLS-1A speaker and other devices connected with the computer are detected, and then click [OK].
Note
-
When installing the SLS-1A speaker, update the system software of the SLS-1A speaker to the latest version, and use the latest version of the Line-Array Speaker Manager application also.
You can check the version of the system software for the SLS-1A speaker in “Software Version” on the [Device] tab.
You can check the version of the Line-Array Speaker Manager application in [Help] on the menu bar.
Check for the latest information at the following URL.
-
When installing the Line-Array Speaker Manager application, the following modules are also installed.
- Dante Control and Monitoring
- Dante Discovery
These are also used by third-party applications for controlling the Dante devices, such as “Dante Controller,” so they are not deleted even if the Line-Array Speaker Manager application is uninstalled.
If you are not using the Line-Array Speaker Manager application, or other applications for controlling the Dante devices, uninstall the modules individually from your computer.