Connecting devices with jacks other than HDMI jacks

Connect each device to the video jack and audio jack on the rear panel of the unit.

Before connecting cables, be sure to disconnect the AC power cord (mains lead).

When connecting devices with video cables and a coaxial digital cable (recommended)

Illustration of connecting the unit and devices using the video and audio cables. The VIDEO IN and AUDIO IN jacks on the rear of the unit are labeled with input names. Use the VIDEO IN and AUDIO IN jacks marked with the same names in combination. For devices with DIGITAL COAXIAL OUTPUT jacks, we recommend using a coaxial digital cable instead of an audio cable for connection. In this case, connect the COAXIAL IN SA-CD/CD jack on the rear of the unit with the DIGITAL COAXIAL OUTPUT jack on the device using a coaxial digital cable (not supplied).

When connecting devices with video cables and audio cables

Audio cable (not supplied)

Video cable (not supplied)

Coaxial digital cable (not supplied)

* To connect a turntable that only has a PHONO output jack, you need to connect a phono equalizer (not supplied) between the turntable and this unit.

Note

  • The analog video signals input from the VIDEO IN jacks are output from the MONITOR OUT jack only.
  • To listen to sound from a device connected to one of the AUDIO IN jacks, do not connect any device to the COAXIAL IN SA-CD/CD jack, the OPTICAL IN TV jack,or an HDMI IN jack labeled with the same device name (such as SAT/CATV, TV, or SA-CD/CD (for AUDIO)).

Hint

  • You can connect devices other than those indicated above to the AUDIO IN jacks (SAT/CATV, AUX, and SA-CD/CD).
  • You can rename each input so that the name can be displayed on the display panel of the unit. For details, see “Changing the name for each input (Name).”
Go to Page Top