Setting up a wireless LAN connection

Please confirm the following information before starting the network settings.

  • The network name (SSID) (*1) of the wireless LAN router/access point
  • The security key (passkey) (*2) for the network

*1 SSID (Service Set Identifier) is a name that identifies a particular access point.

*2 This information should be available from a label on your wireless LAN router/access point, from the operating instructions, from the person who set up your wireless network, or from the information provided by your Internet service provider.


  1. Select [Setup] - [Network Settings] from the home menu.
  2. Select [Internet Settings].
  3. Select [Next] when [Perform Wi-Fi setup.] is displayed on the TV screen.

    A list of network names (SSID) is displayed on the TV screen.

  4. Select a network name (SSID).

    The unit starts connecting to the network.

    To connect to a network not listed, select [New connection registration] and follow the on-screen instructions.

  5. Confirm the connection result displayed on the TV screen.

    When the unit is successfully connected to the network, [NETWORK] lights up on the display panel of the unit.

    If the connection to the network has failed, select [Advanced Settings], and then follow the on-screen instructions to set the network name (SSID), wireless LAN router security method, and IP address.

Hint

  • See [Network Connection Status] in the [Network Settings] menu when checking the network settings.