Performing Initial Settings

  1. Press (power) on the remote control supplied with the speaker system to turn on the speaker system.

    Operate the remote control by pointing it toward the front of the control box.

    When the speaker system turns on, [SETUP] appears in the front panel display.

  2. Turn on the TV.

    If the [Speaker connection check] screen does not appear on the TV screen, change the TV input setting to the input that the speaker system is connected.

  3. Check that the connection between the control box and four speakers is completed on the TV screen.

    The control box and speakers are connected automatically.

    The sound for connection completion is output after the check marks appear on all the speakers.

    The power indicator of the speaker lights in green when connecting to the control box.

    [ Speaker connection check]

  4. Perform initial settings by following the on-screen instructions.

    [ Language]

    [ Sound Field Optimization]

    [ Easy Network Setup - Start]


    Once [Setup is complete.] appears, select [Finish].

Note

  • Depending on the order in which you turn on the TV and the speaker system, the speaker system may be muted and [MUTING] is displayed on the front panel display of the speaker system. If this happens, turn all devices off, then turn on the speaker system after turning on the TV.
  • During [Sound Field Optimization], a measuring sound is output for about 1 minute.
  • The speaker system does not output sound until completing the wireless connection between the control box and four speakers.
  • If the control box and speakers are not connected automatically in step 3, reset the speakers.
Go to Page Top