If the Speakers Are not Connected Correctly

The speakers are connected to the control box automatically when they are turned on.

If you use multiple speaker systems and want to specify the control box that is connected wirelessly to the speakers, perform the manual connection by following the steps below.

Illustration indicating the locations of the power indicator and LINK button. A power indicator is located on the front of each speaker, and a LINK button is located in the recess on the bottom of each speaker.

Power indicator

LINK

  1. Press HOME.

    The home menu appears on the TV screen.

  2. Select [Setup] - [Advanced Settings] on the home menu.
  3. Select [Speaker Settings] - [Wireless Speaker Settings] - [Start manual linking].

    The [Start manual linking] screen appears on the TV screen.

  4. Press LINK on all the speakers.

    The power indicators of the speakers flash twice repeatedly in green.

  5. Select [Start].

    The manual connection starts.

    The connecting process appears on the TV screen.

    To cancel the manual connection, select [Cancel].

  6. When all the speakers display [Connected], select [Finish].
  7. Press (enter).

    The manual connection is established and the power indicators of the speakers light in green.

Note

  • If you perform [Start manual linking], [Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [Link mode] is set to [Manual] automatically.
  • Only the speakers for which [Connected] has been displayed in step 6 connect to the control box. If the connection of the speakers cannot be established, perform the operation again from step 1.
Go to Page Top