Single Bracket

Shoots multiple images while automatically shifting the exposure from base to darker and then to lighter. You can select the image that suits your purpose after recording.
Since a single picture is taken each time you press the shutter button, you can adjust the focus or the composition for each shot.

  1. Select (Bracket) by turning the drive mode dial.
    • Turn the drive mode dial while holding down the drive mode dial lock release button.
  2. MENU → (Camera Settings1) → [Bracket Settings] → [Bracket Type] → [Single Bracket] → desired mode.
    • The setting screen for [Bracket Type] can be displayed by pressing the Fn button.
  3. Adjust the focus and shoot the image.
    • Press the shutter button for each image.

Menu item details

For example, when [Single Bracket: 0.3EV 3 Image] is selected, three images are shot one at a time with the exposure value shifted up and down in increments of 0.3 EV.

Note

  • When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is changed by adjusting the ISO value. If a setting other than [ISO AUTO] is selected, the exposure is changed by adjusting the shutter speed.
  • When the exposure is compensated, the exposure is shifted based on the compensated value.
  • Bracket shooting is unavailable in the following shooting modes:
    • [Intelligent Auto]
Go to Page Top