Performing calibration

Calibration is the detection of the orientation of the sensors on your body by the app for correct motion capture. The position of a sensor changes even when the same user is reattaching the sensor. Perform calibration every time you put on the sensors before starting motion capture.

  1. On the [Calibration] screen, select the user’s height and tap [NEXT].
  2. Tap [START CALIBRATION] and stand up straight.

    Hint

    • While standing up straight, keep your feet shoulder-width apart and your arms relaxed and down at your sides.
  3. After the sound and vibration signals from your smartphone, take one step forward and then stand up straight again.

    [Successfully calibrated] appears on the screen and the motion capture screen appears.

Note

  • Do not hold your smartphone while you are standing up straight. Stand still without moving your body.
  • Do not look at your smartphone screen during calibration. Doing so shifts your head sensor and prevents the sensors from being calibrated accurately. After you start the calibration, take one step forward with the sound and vibration and then stand up straight again.
  • If the calibration fails, you may have incorrectly taken one step forward after you stood up straight the first time. Tap [WATCH AGAIN] in the center of the [Calibration] screen to check the movement.
    You can also watch a video of the calibration movements by accessing (menu icon) > [Tutorial video].
  • If calibration fails even after you perform the steps correctly, reconnect the sensors. Take the sensors off your body, remove them from their sockets, place them on a flat surface, and then reconnect them.
    Tap (menu icon) > [Return to start menu].
TP1001055226