Settings icons

The settings that can be adjusted depend on the shooting mode.

Image showing where each icon is located on the Photo Pro standby screen in the AUTO/P/S/M mode. Upper row from left to right, 1 to 6. Lower row from left to right, 7 to 12.

  1. Drive mode

    Single shooting

    Continuous shooting: Hi: Shoots images continuously while you press and hold down the camera key. The speed reaches a maximum of 20 images per second.

    Continuous shooting: Lo: Shoots images continuously while you press and hold down the camera key. The speed reaches a maximum of 10 images per second.

    Self-timer: 3 sec / Self-timer: 10 sec

  2. Focus mode

    Single-shot AF: When you press the camera key halfway down and the camera focuses on a subject, the focus remains locked until you stop pressing the camera key halfway down. Use [Single-shot AF] when the subject is motionless.

    Continuous AF: The camera continues to focus while the camera key is pressed and held halfway down. Use [Continuous AF] when the subject is in motion.

    Manual Focus: Adjusts the focus manually. If you cannot focus on the intended subject using auto focus, use manual focus.

  3. Focus area

    Wide: Automatically focuses on the whole range of the screen.

    Center: Automatically focuses on a subject in the center of the image.

  4. Exposure value

    Adjusts the exposure value in the Shutter speed priority (S) mode and Manual exposure (M) mode using the dial.

  5. ISO sensitivity

    Sets the ISO sensitivity automatically (AUTO) or manually. Sensitivity to light is expressed by the ISO number (recommended exposure index) using the dial. The larger the number, the higher the sensitivity.

  6. Metering mode

    Multi: Measures light on each area after dividing the total area into multiple areas and determines the proper exposure of the entire screen (Multi-pattern metering).

    Center: Measures the average brightness of the entire screen, while emphasizing the central area of the screen (Center-weighted metering).

    Spot: Measures only inside the metering circle.

  7. Flash mode

    Auto / Fill flash / Red-eye reduction / Off / Flashlight

  8. White balance

    Auto / Cloudy / Daylight / Fluorescent / Incandescent / Shade

    Custom 1 / Custom 2 / Custom 3: Memorizes the basic white color under the light conditions for the shooting environment. To adjust the basic white color, select one of the items, tap [Adjust], and then move the orange dot to the desired position. After adjusting, tap (Close button).

    Image of the basic white color adjustment window when using Photo Pro

  9. Face/Eye AF

    On / Off

    The camera detects the faces or eyes of people and animals and focuses on them automatically.

  10. File format

    RAW: Digital processing is not performed on this file format. Select this format to process images on a computer for professional purposes.

    RAW & JPEG: A RAW image and a JPEG image are created at the same time. This is suitable when you need two image files, a JPEG for viewing, and a RAW for editing.

    JPEG: The image is recorded in the JPEG format.

  11. Aspect ratio (Image size)

    The image size is displayed according to the aspect ratio.

    4:3 / 16:9 / 1:1 / 3:2

  12. D-Range Optimizer (DRO) / Auto HDR

    D-Range Optimizer: Corrects the brightness automatically.

    Auto HDR: Corrects the brightness automatically.

Go to Page Top