Bulb shooting

You can shoot a trailing image of the movement of a subject with long exposure.

Bulb shooting is suitable for shooting trails from stars or fireworks, etc.

  1. Set the mode dial to M (Manual Exposure).
  2. Turn the control dial clockwise until [BULB] is indicated.
  3. Select the aperture value (F-value) using the aperture ring.
  4. Press the shutter button halfway down to focus.
  5. Press and hold the shutter button for the duration of the shooting.
    As long as the shutter button is pressed, the image sensor is exposed.

Hint

  • When shooting fireworks, etc., focus at infinity in manual focus mode.
  • In order to perform bulb shooting without causing the image quality to deteriorate, we recommend that you start shooting while the camera is cool.
  • During bulb shooting, images tend to blur. It is recommended that you use a tripod, a Bluetooth remote commander (sold separately) or a remote commander equipped with a lock function (sold separately). When using the Bluetooth remote commander, you can start bulb shooting by pressing the shutter button on the remote commander. To stop bulb shooting, press the shutter button on the remote commander again.

Note

  • The longer the exposure time, the more noise will be visible on the image.
  • You cannot set the shutter speed to [BULB] in the following situations:
    • When the drive mode is set to the following:
      • [Cont. Shooting]
      • [Self-timer(Cont)]
      • [Cont. Bracket]
    • [Shutter Type] is set to [Electronic Shutter].
    • Interval shooting
    If you use the above functions when the shutter speed is set to [BULB], the shutter speed is temporarily set to 30 seconds.
TP1001776498