Using the wrapping cloth

  1. Place the camera inside into the pocket of the wrapping cloth.
    • Make sure that the camera is turned off before placing the camera inside into the wrapping cloth.

  2. Wrap the camera by folding the flap (A) of the wrapping cloth, and then press lightly to secure it.

    • When carrying the camera in the wrapping cloth, be sure to place the flap side up to prevent the camera from falling.

Note

  • The wrapping cloth (supplied) is intended for storing and carrying the camera but cannot be used to protect the camera from impacts or pressure.
  • Do not wipe the surface of the lens or the monitor of the camera with the wrapping cloth.
  • Do not leave the wrapping cloth under direct sunlight, inside a closed car, or near a heater.
  • Do not use volatile substances such as alcohol, petroleum-based solvents, or paint thinner or hard brushes or scrubbing pads to clean the surface of the wrapping cloth.
  • The wrapping cloth is not waterproof.
  • Use adhesive tape or the like to remove dust from the surface.
  • The wrapping cloth is not machine washable. We recommend hand washing it with a mild detergent and drying it in the shade.
  • Do not iron the wrapping cloth.
TP1001849861