Reg. Flash Shooting Set
The shutter speed and ISO sensitivity when shooting with the flash are kept separately from the settings when the flash is not used. The camera determines whether or not the flash is turned on and automatically switches between settings.
- MENU →
(Exposure/Color) → [Flash] → [Reg. Flash Shooting Set]. -
Select an item to set for flash shooting, and then press the center of the control wheel to select the desired setting.
- Add checkmarks to the items that you want to recall when shooting with the flash, and then select [OK].The setting will be saved.
Menu item details
-
Shutter Speed Range: - Sets [Min] and [Max] for the shutter speed during flash shooting.
- This setting is available when the shooting mode is set to P or A.
-
ISO:
- Sets the ISO sensitivity for flash shooting.
- This setting is available when the shooting mode is set to P, A, S, or M.
Hint
- You can change these settings even when a flash is not attached.
- For details on flashes that are compatible with this function, refer to the following support page.
Note
- The upper limit of the shutter speed varies between 1/2000 and 1/4000 seconds depending on the aperture value. Therefore, depending on the aperture value when shooting, the shutter speed set using [Shutter Speed Range] may not be achieved.
TP1001797215