Pairing with a Mac

Supported operation systems

macOS Catalina (version 10.15)


  1. Check that the speaker system is in pairing mode.

    During pairing mode, the (BLUETOOTH) indicator on the front speaker flashes twice repeatedly.

  2. Set the speaker of your Mac to on.

    If the speaker of your Mac is set to (mute), sound is not output on the speaker system.

    • When the speaker of your Mac is set to on

  3. Search for the speaker system on the Mac.
    1. Click [ (System Preferences)] - [Bluetooth] in the taskbar on the right-bottom of the screen.

    2. Select [HT-AX7] from the Bluetooth screen, then click [Pair].

  4. Follow the on-screen instructions to establish a BLUETOOTH connection.

    When the BLUETOOTH connection is established, you hear a beep sound from the speaker system and the activity of the (BLUETOOTH) indicator on the front speaker changes from flashing to lit.

    If you cannot establish a connection, start from “Preparation: Setting the Speaker System to Pairing Mode” again.

  5. Click the speaker icon in the top-right of the screen and select [HT-AX7] from [Output Device].

    You can enjoy playing back music, etc. from your Mac.

Note

  • The above operation is an example. For details, refer to the operating instructions of your Mac. In addition, not all Macs are tested and found compatible with the above procedure.

Hint

  • You can connect the speaker system concurrently with up to 2 BLUETOOTH devices. (Multipoint connection)
Go to Page Top