Bar Speaker
Front
-
Remote control sensor
Point the remote control at the remote control sensor of the bar speaker to operate the speaker system.
-
Sub status indicator (white)
Indicates the speaker system status by lighting or flashing in white.
-
Main status indicator (colored)
Indicates the speaker system status by lighting or flashing in 5 colors (white/light blue/blue/green/red).
-
(Power)
Turns on the speaker system. If you press this button when the speaker system is turned on, the speaker system is set to standby mode.
Press and hold for more than 10 seconds to reset the speaker system.
Rear
-
AC inlet
-
HDMI IN jack
-
HDMI OUT (TV (eARC/ARC)) jack
Use an HDMI cable to connect a TV that has an HDMI input jack. The speaker system is compatible with eARC and ARC. ARC is a feature that sends TV sound from the HDMI jack on the TV to an AV device such as the speaker system via an HDMI cable. eARC is an advanced version of ARC that enables transmission of object-based audio and multi-channel LPCM content that cannot be transmitted with ARC.
-
S-CENTER OUT jack
Outputs the center part of the speaker system sound from a TV if the speaker system is connected to the TV with the S-CENTER SPEAKER IN jack.
Hint
- There are two tactile dots that are about 1 mm in size next to the S-CENTER OUT jack. There are three tactile dots that are about 1 mm in size next to the HDMI OUT (TV (eARC/ARC)) jack. Use them as a guide during connection.
Bottom
-
FOR SERVICE port